TO SET UP THE TCP/IP CONNECTION

1. Select Start
  Select Program
  Select Accessories
  Select Dial-Up Networking

2. The Dialup Networking Box will open.
  Double-click on the Make New Connection icon.

3.Type in a connection name (example, Harris County or
  Subscriber).

     If Windows '95 has not already configured your modem:
     Under Select a modem, designate the type of modem you are
     using.
     
     Select Configure.
     On the General menu sheet, select the Port where your
     modem is connected.
     Select Maximum speed (baud rate) of your modem.

     Make sure the following settings are in place:
     Select the Connection menu sheet (available after you
     click on Configure),
     Data bits equals 8
     Parity equals None
     Stop bits equals 1

     Select OK.
     Select Next.

4.If you are calling from the 713 or 281 area code, skip over
  the Area code box, and type in the phone number 2815290096.
     Select Next.
     Select Finish.

5.Now that you have an icon for your connection, you will
  designate its properties:
     Right click on the icon and choose Properties from the pop-up menu.
     Click on the button labeled Server Type.
     Under Advanced Options de-select Log on to Network.
     Under Allowed Network Protocols de-select NetBEUI  and IPX/SPX.
     The only protocol that should be checked is TCP/IP.
     Click on OK.
     Click on OK again.

Once you have set up the TCP/IP connection to the Harris County
computer, you will begin with this step whenever you want to
access the Subscriber Access system from your Windows '95 PC.

TO MAKE THE TCP/IP CONNECTION

1.Double-click on your Harris County subscriber icon.
     In the User name field, type the NUI issued by Harris County to
       your agency (e.g., 713221####).
     In the Password field, type the 6-character network password as
       issued to your agency by Harris County.  NOTE: The agency
       password is case sensitive and must match what Harris County has
       issued.  Type the password in uppercase or lowercase as specified
       on the NUI assignment form from JIMS Training.

2.Click on Connect.
     A status box appears.  Once the connection has been made,
     the connection speed and call duration display.  Now you
     are ready to run TELNET.


TO RUN TELNET

3.Select Start.  Select Run.
  Type TELNET 10.1.240.6
  Press Enter or click OK.

4.In the TELNET Window you will see:
     *** Welcome to Harris County Intranet Gateway GW1 ***
     login:

5. Type dialup, and press Enter.
   Type your agency's NUI in the User Code field (e.g., 713221####).
     Press Enter
   Type your agency's 6-character password.
     Press Enter

6.The screen will now display:
          Welcome to Harris County Intranet Gateway Menu
          Please Select from the Following List

  Type 2 and press Enter to select the District Clerk
  records housed in JIMS.

The PC is connected with the Harris County mainframe computer.
The current user must now log on with his or her own personal
log-on ID and password.